Recovery Card protects a hard drive data from unintentional damage as well
as from tampering with the system configuration.
data lost from virus infection, running FDISK, re-formatting the hard
disk, file deletion and tampering with files. The Recovery Card completely
resolve problems that many computer users sometime get great headache
handling network system.
simplifies system administration by standardizing and improving the
security for your PCs. With the Recovery Card installed, people can learn
and practice commands like Delete, FDISK, and Format and be assured that
the data and configuration is safe.
data, files, or programs will be recovered just simplify reboot of the
computer and click “restore” button. The Recovery Card also provides
easy-to-use user interface and various management modes for simple
operation. Are you looking for methods to minimize the maintenance time
and cost for maintaining a good computer systems? The Recovery Card is the
It also provides complete protection from all viruses by being able
to automatically restore the hard disk after rebooting the computer
(Recover all the deleted files/programs, formatted hard drives, changed
CMOS settings) Support Multi-boot up to 30 partitions. Support 1 to 3 hard
disk copies, track by track. Please note - the card may look
slightly different than the one pictured depending on the most recent
model released - all the features are the same.
Main features of Recovery Card
data instantaneously, as it simply forgets all the changes made.
compatibility support for Windows 95, 98, ME, NT, 2000 and XP, and
support for the BIGDOS, FAT16, FAT32 and NTFS file systems.
for BIOS protection and recovery of hard disk parameters and type.
Recovery card has a built-in VxD device driver of Windows 95, 98 and ME,
therefore it does not need a floppy disk during installation and usage.
On Windows NT, 2000 and XP a driver has to be installed.
for automatic maintenance of all computers in a networked computer room.
Maintaining a computer room is now just like maintaining a single
computer. The Recovery card supports synchronization, remote on/off
switching and automatic setting of IP address, computer name and user
for multiple partition protection. If the hard disk is divided into
multiple partitions, the Recovery card can protect all or any of the
partitions. For example if the hard disk is divided in partitions C, D
and E, protection can be switched on for drives C and E leaving drive D
unprotected. Of course any combination of protected and unprotected
drives is allowed.
for high-speed access modes such as Ultra-DMA66 and ATA-100.
for large hard disks with a capacity of over 100 GB.
for hard disks with IDE, EIDE and SCSI interfaces.
virus infection and destruction of protected drives, and can disable
disk management tools and low-level formatting tools.
fast installation options.
disk performance loss.
recovery card and installation floppy disk (19 page PDF manual on disk)
and manual can be downloaded here
- PCI Bus
plug-and-play without any changes to the hard disk, the installation
uses as little as 0.5% of the available hard disk space –which is
negligible with today’s hard disk sizes.